Interfacing LCD with PIC Microcontroller – Hi Tech C

future engineers

Interfacing LCD with PIC Microcontroller – Hi Tech C

by Ibrahim hebron 16×2 Character LCD is a very basic LCD module which is commonly used in electronics projects and products. It contains 2 rows that can display 16 characters. Each character is displayed using 5×8 or 5×10 dot matrix. It can be easily interfaced with a microcontroller. In this tutorial we will see how to write data to an LCD with PIC Microcontroller using Hi-Tech C Compiler. Hi-Tech C has no built in LCD libraries so we require the hardware knowledge of LCD to control it. Commonly used LCD Displays uses HD44780 compliant controllers.

16×2 LCD Pin Diagram

This is the pin diagram of a 16×2 Character LCD display. As in all devices it also has two inputs to give power Vcc and GND. Voltage at VEE determines the Contrast of the display. A 10K potentiometer whose fixed ends are connected to Vcc, GND and variable end is connected to VEE can be used to adjust contrast. A microcontrol

application was unable to start correctly(0x000005)

future engineers

       How are you,i hope everybody is cool and everybody enjoying this wonderful weekend especially sunday..here today i want you to share some solutions about ''application was unable to start correctly(0x000005) ''
   

 

  

 

  Here My Aim is to discuss how to avoid that kind of error,what i want is your views and finally we will sum up and produce the strong post about ''application was unable to start correctly(0x000005) ''
      Please whenever you will read this post make sure you comment anything you know about here on the comment box
     i value your comments